Charcoal Fibreglass Pool Mosaic Tissue sheet 610mm x 150mm

Minimum order quantity: 20 Sheets=12.2m

Mosaic sheets used on waterline and step edges of fibreglass swimming pools

MPORTANT:

• Not for direct use on a concrete, cement or marblite surfaces
• Ensure that sufficient material is available before application starts 
  
• A colour variation may occur between batches

Application:

Apply tissue sheets only on resin based fibreglass pool linings or epoxy painted surfaces. Use a Clear Top Coat & Catalyst mixture to apply.

How to install it on fibreglass:

Printed tissue sheets are installed on waterline and steps of swimming pools to mark edges. On the waterline it helps to hide unsightly scum marks and stains.

• Sand down the old fibreglass surfaces or new fibreglass that was standing longer than 12 hours in order to remove the "wax layer" on the surface
• Apply a top coat as background colour that will show as grout-lines. Let it dry.
  
• Then apply a coat of Clear Top Coat and stick the printed tissue paper into position
  
• Apply several layers of Clear Top Coat over it and allow to dry between layers