Printed Mosaic Fibreglass Tissue Sheets

To install a printed pattern on waterline, floor, walls and steps:

  • Sand down old fibreglass surfaces or new fibreglass that was standing longer than 12 hours in order to remove the "wax layer" on surface
  • Apply white* top coat as background colour on the sanded down area and let it dry
  • Then apply a coat of clear top coat after which you stick the printed mosaic onto. .
  • Apply several layers of clear top coat over it and allow to dry between layers
  • After the printed pattern is finally, mask off with masking tape and apply top coat (normally white, blue) to the rest of the pool

* Skyblue top coat or any contrasting colours are used as background colour for pool mosaics


For full instructions to re-line a new concrete swimming pool or old marblite pool, click here