Fibreglass Pool Mosaic Tissue Sheet - Carrabean 810mm x 160mm

Minimum order quantity: 20 Sheets = 16.2m

IMPORTANT:

• Not for direct use on a concrete, cement or marblite surfaces
• Ensure that sufficient material is available before application starts 
  
• A colour variation may occur between batches

Application:

Apply only resin based fibreglass pool lining or epoxy painted surfaces using Clear Top Coat & Catalyst mixture

How to install it on fibreglass:

Printed tissue sheets are installed on waterline and and steps of swimming pools to mark edges. On the waterline it helps to hide unsightly scum marks and stains.

    Sand down the old fibreglass surfaces or new fibreglass that was standing longer than 12 hours in order to remove the "wax layer" on the surface
    Apply white top coat as background colour on the sanded down area and let it dry
    Then apply a coat of clear top coat after which you stick the printed mosaic onto it
    Apply several layers of clear top coat over it and allow to dry between layers
    After the printed pattern is finally, mask off with masking tape and apply top coat (normally white, blue) to the rest of the pool

  For the diy home decorator :

"Decoupage is a traditional paper art form that involves decorating objects or surfaces"

These mosaics are perfect to use for decoupage  as it is printed on tissue paper