Blue Diamond-Fibreglass Swimming Pool Mosaic Tissue Sheet 620mm x150mm

Minimum order quantity: 20 Sheets=12.4m

IMPORTANT:

• Not for direct use on a concrete, cement or marblite surfaces
• Ensure that sufficient material is available before application starts 
  
• A colour variation may occur between batches

Application:

Apply only resin based fibreglass pool lining or epoxy painted surfaces using Clear Top Coat & Catalyst mixture

How to install it on fibreglass:

Printed tissue sheets are installed on waterline and and steps of swimming pools to mark edges. On the waterline it helps to hide unsightly scum marks and stains.

• Sand down the old fibreglass surfaces or new fibreglass that was standing longer than 12 hours in order to remove the "wax layer" on the surface
• Apply white top coat as background colour on the sanded down area and let it dry
• Then apply a coat of clear top coat after which you stick the printed mosaic onto it
• Apply several layers of clear top coat over it and allow to dry between layers
• After the printed pattern is finally, mask off with masking tape and apply top coat (normally white, blue) to the rest of the pool