Floorkote Enamel for cement floors - 5L

A premium quality, solvent based urethane alkyd floorkote enamel (STOEP ENAMEL)

Stevensons Professional Floorkote is a premium solvent
based Urethane Alkyd enamel for interior and exterior floor
surfaces.

Features & Benefits /Intended Uses

• Suitable for application to correctly prepared, concrete,
  masonry and cement floors surfaces and for redecorating of
  previously painted floors.
• For commercial and residential floors
• Showrooms
• Light-industrial floors
•  Kitchens and restaurants
• Garages
• Stoeps and patios
• Excellent wear properties
• Superior adhesion
• High Solids formulation giving high film build
• Single component – easy, no-mix formula
• Polyurethane performance for toughness
• Excellent scratch, scuff and wear resistance
• Chemical and stain resistant

Surface Preparation

Ensure that the surface is properly dry and in sound condition,
free from dust, grease, oil, algae, fungus or any loose particles
before painting.

NEW SURFACES
Allow new cement floors at least 28 days to cure.
Check the cement floor for conditions that might interfere
with proper adhesion, such as moisture, loose crumbling
cement, cement dust, floated or shiny cement floors, sealed
cement, release agents, curing compounds, salts,
efflorescence and laitance, dust, oil and grease.
Etching: All floated or shiny cement should be etched with
Spirits of salt. Wash surface thoroughly with water.
Cleaning: All surfaces must be sound, clean and free of oil and
grease. Use Fast Grease Buster for de-greasing.