Skip to product information
1 of 3

Sun Command Pool Heating 2 Solar Panel DIY Kit

Sun Command Pool Heating 2 Solar Panel DIY Kit

Options:
Regular price R 7,899.00
Regular price Sale price R 7,899.00
Sale Sold out
Shipping calculated at checkout.

When can I expect delivery?

Cape Town, Durban, Gauteng: 7 Days | Other areas: 9 Days | Sorry, no delivery to outlying areas and farms.

Sun Command Pool Heating Panels uses flat panels or collectors to harness the sun's energy to heat your pool water. These solid polypropylene panels have a 50mm inlet and outlet header that directs the water through small channels for maximum heat transfer.

By using a pool filter and cover, you can efficiently raise your pool's temperature by 8 to 12 degrees Celsius. This eco-friendly and cost-effective method can extend your swimming season up to 9 months of the year.

Trust our expertise! Follow the sizing guidelines below for optimal results: 28-32 degrees Celsius is ideal for most social swimmers.

Solar pool heating sizing based on 3m panels

- 2 Panels are ideal for small jetted pools, spas and Jacuzzi's reducing pump circulation time to as little as 3 hours per day during the warmer months. A temperature controller is however recommended to ensure that the water temperature does not exceed 40 Degrees Celsius that can cause PVC pipes to melt.

For outdoor pools:

  • With Pool Cover: 20000 Litre or with a surface area of approx. 17m2
  • Without Pool Cover: 12000 Litre or with a surface area of approx. 10m2

Indoor Pools:

  • With Pool Cover: 12000 Litre or with a surface area of approx. 10m2

DIY Kit Supplied for the 2 Panels is as follows:

(2) x Solar Panels
(2) x Backing sheets

(1) x PVC Glue
(10) x Hose Clamps
(2) xĀ EPDM End Caps
(2) x 50mm PVC-Poly Adaptor
(4) x EPDM Connectors
(20) x 50mm PVC 90 Degree Elbows
(4) x 50mm PVC Connectors
(3) x 50mm PVC T-Piece
(4) x 50mm PVC 45 Deg
(1) x Ball Valve Glued - drill 8mm hole {Bypass ballvalve}
(2) x Ball Valve Glued {Shut-off ballvalves}
(1) x 50mm PVC Non-return valve
(1) xĀ PVC tank adaptor
(1) x Nylon Reducing bush
(1) x Vacuum breaker
(2) x Ā PTFE Tape
(15m) x Nylon Ski Rope

Tools Required for Installation

  • Hacksaw
  • Screwdriver
  • Ladder
  • Drilling Machine
  • Extension
  • Hammer
  • Measuring Tape

On a Metal roof extra items required:

  • Pop Rivet Gun
  • Roof Sealer
  • Paint Brush

Diagram of solar pool heating Installation

Ā 

Ā Conditional carry-in warranty: 5 years

1.Subject to use of a backing sheet
2.Installation done insuring the panels drain all water when the pump is not working


Manufacturer's 5 year carry-in warranty

View full details