Sun Command Pool Heating 4 Solar Panel DIY Kit

Using flat panels or collectors, Sun Command Pool Heating Panels harness the sun's energy to efficiently raise your pool's temperature by 8-12°C.

Extend your swimming season with our eco-friendly and cost-effective method.

Follow our sizing guidelines below for optimal results.

Solar pool heating sizing

For outdoor pools:

• With Cover: 40000 Liter or with a surface area of approx. 32m²
• Without Cover: 26000 Liter or with a surface area of approx. 18m²

Indoor Pools:

• With Cover: 25000 Liter or with a surface area of approx. 18m²

DIY Kit Supplied for the 4 Panels is as follows:

(4) x Solar Panels
(4) x Backing sheets

(1) x PVC Glue
(18) x Hose Clamps
(2) x EPDM End Caps
(2) x 50mm PVC-Poly Adaptor
(8) x EPDM Connectors
(20) x 50mm PVC 90 Degree Elbows
(4) x 50mm PVC Connectors
(3) x 50mm PVC T-Piece
(4) x 50mm PVC 45 Deg
(1) x Ball Valve Glued - drill 8mm hole {Bypass ballvalve}
(2) x Ball Valve Glued {Shut-off ballvalves}
(1) x 50mm PVC Non-return valve
(1) x PVC tank adaptor
(1) x Nylon Reducing bush
(1) x Vacuum breaker
(2) x  PTFE Tape
(25m) x Nylon Ski Rope

Tools Required for Installation

• Hacksaw
• Screwdriver
• Ladder
• Drilling Machine
• Extension
• Hammer
• Measuring Tape

On a Metal roof extra items required:

• Pop Rivet Gun
• Roof Sealer
• Paint Brush
• Tie down roof brackets

Diagram of solar pool heating Installation

 Conditional carry-in warranty: 5 years

1.Subject to use of a backing sheet
2.Installation done insuring the panels drain all water when pump is not working